Samsung Galaxy S22+: The design and technical specifications have been leaked

Samsung is getting ready to launch new flagship family, Samsung Galaxy S22.

It will consist of three devices: Basic Samsung Galaxy S22, Samsung Galaxy S22+ and Samsung Galaxy S22 Ultra.

To date, many leaks and rumors surrounding the Galaxy S22 lineup have surfaced on the internet, and today, 91mobiles bring The official render of the Samsung Galaxy S22+ along with its main specifications.

The device will feature a selfie camera in a single center hole and very narrow symmetrical bezels around the screen. The power button and volume up and down buttons are on the right side of the device.

The device appears to have a metal chassis and on the back will feature a triple rear camera setup and an LED flash located to the right of the vertical camera module. We can also see the Samsung logo at the bottom of the back of the device.

according to Ishan Agarwal, Samsung Galaxy S22+ to be launched in UK with processor Exynos 2200.

The Samsung Galaxy S22+ display will have a maximum brightness of 1,750 nits and an adaptive refresh rate

The 50MP wide-angle (main) camera on the Samsung Galaxy S22+ and Samsung Galaxy S22 will feature Adaptive Pixel technology, which offers two photo capture modes: 108MP (remosa mode) and 12MP (9:1 pixel binning). Photos will be taken in 12-bit.

The Samsung Galaxy S22 will weigh 167 grams, but the Samsung Galaxy S22+ will be slightly heavier at 195 grams. The Samsung Galaxy S22 Ultra will be the heaviest of the three at 228 grams.

Finally, the Samsung Galaxy S22+ will feature b4,500mAh battery with support for 45W fast charging via the USB Type-C charging port.

Matt Thompson

"Problem solver. Proud twitter specialist. Travel aficionado. Introvert. Coffee trailblazer. Professional zombie ninja. Extreme gamer."

Leave a Reply

Your email address will not be published. Required fields are marked *